Wafaa A. Khalil 1, Nadia Lotfy Helal 2, Mahrous Elsayed 3

 1Professor of Biophysics, Faculty of Sciences, Cairo University.

2 Vice-Section Head of Radiation Control Egyptian Nuclear& Radiological Regulatory Authority, Egypt

3Radiation Protection Department Manager, EastZeit Petroleum Company, Egyptian General Petroleum Corporate, Egypt

Received: Aug 4, 2021 / Revised: Sept 12, 2021/ Accepted: Sept 14, 2021

Abstract

 Processing activities for oil and gas production have been known to produce large amounts NORMs (Naturally Occurring Radioactive Materials) at elevated concentrations as by-product waste streams. This means that TE-NORM (technologically enhanced naturally occurring radioactive materials) can pose Radiation exposure levels that are generated by waste from the oil & gas industry. which necessitate constant monitoring and attention during NORM decontamination of oil and gas equipment.  The most common source of exposure is external and internal radiation coming from the 226Ra & 228Ra (U-238 and Th-232 series) radionuclides and their progenies. In this study, we focus on the yearly dose of workers who are working in recently established dry decontamination facility as a dedicated tool for NORM contaminated tubing and other small installation’s decontamination using abrasive blasting machines instead of High-Pressure Jetting Water facilities, in purpose to minimize the waste volume produced as well as reduce the exposure time of workers involved in the decontamination process. Workers were monitored for one year on three months’ basis using the TLD badges. Two groups of workers were formed of 5 persons for each group, working back-to-back 15 days on – 15 days off in field basis, for around 10 working hours/day. All recorded personal doses were within the occupationally acceptable dose limits (20mSv/Year). Most of the workers were exposed to doses range of 700 – 1000 µSv/ 3 months, two readings were away of this range, but even though still within the occupationally acceptable dose limits.  It was found that used protective measures against external and internal contamination help enhancement of workers’ protection against NORM hazards as well as minimizing the NORM contaminated wastes using the dry decontamination technique to a very far extent in comparison to high pressure jetting water technique which had positive impact on the environment in terms of the radioactive decontamination in oil and gas working environment.

Keywords NORM, Occupational dose, Pipes Decontamination, Egyptian Oil field, scale, Radiation Safety, Environment protection

How to cite this article:

Khalil, W.A., Helal, N.L., Elsayed, M. (2021). Assessment of the annual dose of the occupational workers involved in dry decontamination of NORM contaminated equipment in Egyptian oil and gas industry. Science Archives, Vol. 2 (3), 201-206. http://dx.doi.org/10.47587/SA.2021.2308

References

Al-Masri, M. S. (1998). NORM Levels at Al-Furat Petroleum Company (AFPC), Oilfields in Deir Ezzor. Technical Rep., AFPC-December.

Al-Masri, M. S., & Suman, H. (2003). NORM waste management in the oil and gas industry: The Syrian experience. Journal of radioanalytical and nuclear chemistry256(1), 159-162.

Authority, E. A. E. (2006). Radiation Protection Requirements for Handling of TE-NORM in the Petroleum Industries. EAEA, Regulatory Guideline, PET-2.

Bruhl G. and al, (1990). “Personal Protective Clothing for the hazardous Environment-Guide for the Selection and Use, Collection PMDS (Protection, Manipulation, Detection, Safety), Vol., VII/2.

Cowie, M., & Mously, K. (2008, April). NORM Management in the Oil & Gas Industry. In SPE International Conference on Health, Safety, and Environment in Oil and Gas Exploration and Production. OnePetro.

Damascus, (1998). Atomic Energy Commission of Syria, “Administrative Council Decision, Rep. AECS 44/98/1”, Atomic Energy Commission of Syria.

Desouky, O., & Morsi, T. (2018). Evaluation the annual effective dose of the NORM decontamination workers during cleaning the oil and gas equipment. Arab Journal of Nuclear Sciences and Applications51(4), 44-50.

El-Ghazaly, S., Hassib, G. M., & Huseen, N. H. (1998, June). Norm survey and control system in the oil production facilities in Egypt. In SPE International Conference on Health, Safety, and Environment in Oil and Gas Exploration and Production. One Petro.

Eylander, J. G. R., Lancee, P., Hartog, F. A., Jonkers, G., & Frigo, D. M. (1997, September). Feasibility study: On-site decontamination of a Dutch E&P site. In Radiological Problems with Natural Radioactivity in the Non-Nuclear Industry (Proc. Int. Symp. Amsterdam, 1997), KEMA, Arnhem.

IAEA-TECDOC 1712, (2013). International Atomic Energy Agency, “Management of NORM Facilities”.

International Atomic Energy Agency, (2003). Radiation Protection and the Management of Radioactive Waste in the Oil and Gas Industry, Safety Reports Series No. 34, IAEA, Vienna.

International Atomic Energy Agency, (2013). “Measurement and Calculation of Radon Releases from NORM Residues”, Technical Report Series 474, IAEA, Vienna.

Janssen, R. J. J. N., & van der Last, B. (1998, October). Safe removal and disposal of naturally occurring radioactive materials from oilfield equipment. In European Petroleum Conference. OnePetro.

Rich, A. L., & Crosby, E. C. (2013). Analysis of reserve pit sludge from unconventional natural gas hydraulic fracturing and drilling operations for the presence of technologically enhanced naturally occurring radioactive material (TENORM). NEW SOLUTIONS: A Journal of Environmental and Occupational Health Policy23(1), 117-135.

License                      Article Metadata

This work is licensed under a Creative Commons Attribution 4.0 International License.

View Details